LQM-I Gas Thermal Oil Heater

Main technical parameters

☑ Design thermal efficiency     95%

☑ Operation temperature       ＜320℃

☑ Heat transfer medium       Organic heat carrier (thermal oil)

☑ Furnace structure     Horizontal, triple return

☑ Furnace coil specifications: Φ 38 × 3mm, double row

☑ Furnace body size       Φ900×1450mm

☑ Operation mode: liquid phase/auxiliary circulation

☑ Load regulation 25-100% continuously adjustable

☑ Control mode       PLC+Variable frequency (reserved RS485 communication interface, RJ45 connector)

☑ Waste heat utilization method: air preheating

☑ Design pressure     0.8mpa

☑ Operating pressure      0.3～0.4mpa

☑ Oil outlet/return diameter  DN50（Standard for pipe flangeHG/T20615，PN16）

☑ Applicable fuel      Natural gas（PNG）、Liquefied gas（LNG）、Petroleum gas（LPG）

☑ Gas caliber       DN20

☑ Gas pressure       6～8kpa（Dynamic pressure）

☑ The default intake direction is below the right front end (please indicate the left intake)

☑ Exhaust gas temperature  ~100 ℃ (varies with oil outlet temperature)

☑ Low nitrogen oxide concentration type ＜50mg/Nm³

☑ Host oil capacity     ～215kg

☑ Equipped with a circulating pump     4.0/5.5kw（Optional specifications; Single/dual pumps are optional）

☑ Installed capacity       5.5/7.0kw

☑ Appearance coating       Overall spray coating, default medium gray+white (other colors can be specified)

☑ Factory form       Skid-mounted

☑ Weight      ～1900kg

☑ Expansion tank size     Φ=500mm，L=800mm，V=200L